Trap unpleasant odors and keep the Litter-Robot IIIOpen Air waste drawer fresh with replacement Carbon Filters and Seal Strips.
- (3) Carbon Filters
- (1) set of Seal Strips
- Compatible with Litter-Robot III Open Air
How often should I change the Carbon Filter?
For optimal odour absorption, we recommend changing the carbon filter every three months, but replacement frequency depends on number of cat and litter used. If using scented litter, changing the filter more frequently will be required as it will also absorb the litter scent. Carbon or activated charcoal litter is recommended to assist odour control.
Note:The carbon filter is not necessary for the unit to function.
How often should I change the Seal Strips?
Replace the seal strips when you notice they are worn flat or peeling up. You can make them last longer by trimming loose edges between replacements. Be careful not to wet them when cleaning the Base or they may begin to peel. To maintain them, use a stiff nail brush or dish plate brush, and vacuum to remove debris before wiping with a damp cloth.
Note: Seal Strips are not required for the unit to function.
After about four months of regular Litter-Robot use by my cat, I started to notice that there was a slight odour in the room where it's kept. I checked the instruction booklet and discovered that the carbon filter does need replacing periodically and the sealer strips may also need to be replaced. I've kept the strips until they're needed and have replaced the carbon filter. No more odour. Phew!
I had no idea how valuable these filters were until I swapped the old with new...magic! The smell was gone, just like that.